All Activity

This stream auto-updates     

  1. Past hour
  2. Yesterday
  3. thx mate, and more details are on the way. am running outa time though anyway, Hi guys, here is a little of what I have been upto today. making the cages was hard enough but this cladding is really tough work, 100s of pieces all cut to size and stuck on in a 10 finger blisterfull week. all my fingers are burnt and hurting now. THE IRON MAIDEN NOW HAS A FACE! :-)
  4. Hi, I'm in the same situation, the 3 front fans turn and display a steady blue color, but I can't control the color. In addition, the 3 fans don't all light at the the same intensity. Do you have any idea to help me ?
  5. - Received a amazing package from GSCUSTOMZ!! - A package that was much anticipated by me was custom cables, and thankfully to GSCUSTOMZ I was able to add some extra flare to this build! - I was Lucky enough to receive a set of custom cable cables extension and more sleeving for the fans. And the quality is amazing even the connections are gold!!
  6. Mine just started up. It was fine for the first 8 months and now I'm having similar problems, but not as bad as others are reported. Stuck colors, not turning on, etc... feels like it's shorting out. Sometimes the rainbow pattern works and then freezes. I just opened a ticket, but really would rather avoid an RMA process for the case. So my question here is how is this getting resolved. I didn't read all the posts, but skimmed a couple pages and didn't see any official responses. Are people getting new parts sent to them or are they being forced to RMA the whole thing. Or is this something simple like a loose connection?
  7. - InWin has joined the build ! - Got amazing news InWin was going to be apart of this build so had to change up some thing’s !! I was lucky enough they supplied these amazing products. 6x Crown 140mm RGB fans and a Commander III 800 watt power supply
  8. - When disaster struck - Since it was so humid when I painted I had to put on the paint a bit thicker which lead to tragedy. - So decides to strip the paint and more tragedy happened, I’ve never use this paint before and it wasn’t even coming off with a sander it was like a clay consistency. So decided to use paint thinner (bad idea) it cracked the piece. - So I said whatever!! I don’t need the stickers for now I’ll do the extra work and make the one with sponsors down the line after fitment. - So I used windshield glass crack filler filled the cracks wet sanded and painted black so I had something to go off of to get the rest of the parts made. As I needed PSU cover for sizing for other parts & liquid cooling routes due to bulkheads .
  9. - Psu cover disaster #1 - Was all going smooth, even made the PSU cover twice cause first one measurements were off. But when it came around to paint is when disaster struck..... (first one didn’t go well cause I did not have the acrylic bender and tried a heat gun, but second one with acrylic bender came out awesome until paint disaster happened) - Even painted it in a paint booth and the humidity screwed me, had to put on paint a bit thicker... and, the stickers didn’t quite peel so good.
  10. - More frame cutting and hole drilling !! - Never have seen a one piece PSU cover for the mastercase 5 , so figured I’d try my hand at it !! And it actually lead to disaster but I was able to fix it after..... two full sets of stickers and two times painting. And 3 different times making the psu cover I got it perfect.
  11. Spent last days with the 3D printer. Got a huge 60h print that has taking lot of time to CAD and tweak, but the first slice out of 5 is loaded as we speak. Very excited to see how it turns out. One of my main challenges with the inside wall is to design a nice loop run. I'm also a little worried with all the drilling, but only way to know, is to get it done. First business of the day. Place the motherboard at the right place, mark the holes and pray (no room for errors). 9 holes later, I only had the last 2 guide bolts to add. 2,5mm drill holes, 3mm thread. Then I just put the motherboard bolts in the teeths of the Ryobi drill and screwed them in. Worked really good. Phu such a relief. Hard to get 9 motherboard bolts in place with just a hand drill, but managed. Happy. Decided to treat this rig with a new heart. 9900K was the obvious choice. Will be a great combo with the beautiful XPX Eisblock from Alphacool I mounted the CPU and added the block temporarly to have the option to turn the block depending on my different choices of tube run. Also took measurements for the dual reservoirs and drilled for the brackets. Passed the point of no return. I find it hard to draw loops in Fusion 360. Makes it easier to test and think IRL, so I always use straws. Pulled out 2 colors to keep the two loops apart and started my design. Had a good idea what I wanted to achieve, but you never know untill it's done for real if it will work. GPU will be vertical and integrated in the shroud. Started with that. The CPU block and VRAM is also 4 placements I can't control, so that was next. This might work With this preliminary backside. Still need to add the 2nd pump (finally got shipping notice about the missing water blocks) to be 100% sure of placement. Converted my temporary straw design to the real thing. This needs to be right. A tight fit with the motherboard, but it cleared. Last problem solved. With a dual angled fitting in the radiator I can stack the pass throughs for that ontop of eachother. Next step is to start to do drill and bend some hard tubes. Super excited.
  12. Inony

    Leviathan

    After spraying the foundation To check the integrity of the skin before painting The storm also attacked my country. Flooding in some provinces. Last week, my house was raining every day . However, I will find a way to finish it. I'll update the work again once it's done.
  13. Inony

    Leviathan

    Before spraying and air brush I will test the ARGB lights at important points for orderliness. BASE HEAD As for the eyes, I use the resin printer It's OK ฺShark fins OMG !! I forgot skin care this piece. I'll do it later Side Fan Grill
  14. - Fan time !! - Working with not the best budget so decided to paint these fans I already had and make custom coolermaster stickers for them as well. And decided to sleeve the fans as well, a BIG thanks to GSCUSTOMZ for the sleeving materials.
  15. - Making the outside stand out !! - Decided to go a little out of order and since the stickers arrived on time. Figured I’d give it some Coolermaster flare ! - I made a sticker design with coolermaster logos and I do not have a vinyl cutter so most of my time waiting was for stickers this whole build.
  16. Inony

    Leviathan

    Up to this stage that I think all parts are ready to be painted and assembled I spent 821 hours in total print and I used 23 boxes of petg filament.
  17. Inony

    Leviathan

    After the worst moments have passed I'm ready for coloring But before that step Must try assembling some pieces to check strength first YEAHH !! Everything came out exactly the way it was drawn and it was strong.
  18. Inony

    Leviathan

    The next step is to scrub the skin smooth. It is a torture that must be done every piece. It's called karma hahaha. It was a long and difficult period. I take it with a sanding machine sanding. And followed by hand polishing with sandpaper number 200 // 400 respectively. At this stage, I didn't save the image. I'm sorry, because the dust is a lot. When the hands are stained, then I don't want to touch the mobile phone ฺBefore Through good skin care
  19. Inony

    Leviathan

    And then repeat with other parts but reduce 3d printer nozzle size to 0.6 // Shell Wall Thickness setting at 2.4 mm to reduce weight and time. The other difficult thing for me is cutting the support line. I use PETG Filament It will be print harder to PLA. But it's stronger And can be exposed to the sun for a long time to paint. To print PETG, your printer must be equipped with a hot end that can reach a temperature of at least 230°. Ideally, you'll want to be able to reach about 250°, but 235° may be sufficient for me It's a nightmare for me. I will survive, hey, hey Every 2-3 pieces, it will get a small wound regularly hahaha
  20. Inony

    Leviathan

    The next challenge was to print the main structure. And separated it from the support section I have to print as big as I can. Reduce connection points for strength Caused by the interlocking of the internal structure. I use 3d printer nozzle size 1.0 // Shell Wall Thickness setting at 5.0 mm // infill 50%
  21. Inony

    Leviathan

    I want to get an overview of more than robots. I want Cybrog design to show some of the main structures. Including wiring at some point It is therefore a difficult task. Elder must design the complex internal structure for realistic look. Even though it was just a sculpture computer but I try to design to make the overall picture the most gentle. Main structure Various hardware locations
  22. Inony

    Leviathan

    Conception and Design Leviathan was the ancient beast of the Sea. One of the 3 primitive demons in the Bible. It's a name that humans call AI hunters, who develop themselves into gigantic creatures in the sea. By relying on the structure of a giant shark.
  23. Inony

    Leviathan

    Hello everyone, this is my first work in this contest. I'm from Thailand. For this job, I will mainly use 3d printing. It's the only thing I have at home. That made me use my free time to work all the time. Inspiration It happened when I played a futuristic game in 3000 A.D., a world in which AI developed itself to its peak. They have their own ideas.Until can convert the biomass into energy. Therefore do not have to rely on humans anymore. They evolve themselves to survive.The wicked world has been destroyed until the end. And humans are no longer the culmination of the food chain
  24. RDR2 logo installed
  25. making a riser holder, with a slight touch of engraving.
  26. Good day, the forum participants fulfilled their dream and bought a new processor from AMD digging, and the following problem arose: the cooler core does not work; your help. thank you in advance Доброго времени суток участники форума, исполнил свою мечту и купил себе новый процессор от копании AMD, и возникла следующая проблема: не работает сердцевина кулера в переводе не подсвечивается крыльчатка после обновления программного обеспечения, я так и не нашёл как её включить, так что надеюсь на вашу помощь. заранее спасибо
  1. Load more activity